Searching, Assessment, and Screening system for safer alternative chemicals

Searching, assessment, and screening system for safer alternative chemicals, GreenN (Green Next)

    e.g.

    Maleic hydrazide

    Chemical structure of PubChem CID 21954

    Risk Level Help

    Chemical Substance Information

    • PubChem CID: 21954
    • CAS: 123-33-1
    • UN NO: 2811
    • SMILES: C1=CC(=O)NNC1=O

    Hazard Assessment Overview Help

    Hazard Sunburst Chart Legend

    Hazard Assessment Summary Table Help CSV format XLSX format
    Reset


    Assessment Type Carcinogenicity Mutagenicity Reproductive Toxicity Developmental Toxicity Endocrine Disruption
    Hazard Assessment Level
    High
    Medium
    Insufficient data
    for classification
    Insufficient data
    for classification
    Insufficient data
    for classification
    Loading
    Assessment Type Acute Toxicity Systemic Toxicity - Single Dose Systemic Toxicity - Repeated Dose Neurotoxicity - Single Dose Skin Sensitization Respiratory Sensitization Skin Irritation Eye Irritation
    Hazard Assessment Level
    Very High
    Insufficient data
    for classification
    Insufficient data
    for classification
    Insufficient data
    for classification
    Insufficient data
    for classification
    Insufficient data
    for classification
    High
    High
    Loading
    Assessment Type Acute Aquatic Toxicity Chronic Aquatic Toxicity
    Hazard Assessment Level
    Insufficient data
    for classification
    Insufficient data
    for classification
    Loading
    Assessment Type Persistence Bioaccumulation
    Hazard Assessment Level
    Insufficient data
    for classification
    Insufficient data
    for classification
    Assessment Type Reactivity Flammability
    Hazard Assessment Level
    Insufficient data
    for classification
    Insufficient data
    for classification
    Loading

    Hazard Diagnostic Modules

    The Hazard Diagnostic Module consists of the following four computational chemistry methods. The predicted toxicity alerts are for reference only and should be evaluated together with other available data.

    1. Substructure Alerts
    2. Similarity Alerts
    3. Read-Across
    4. Classification Models

    SMARTS Pattern Endpoint Source Author Journal Reference
    Loading
    Loading
    Loading

    Physical and Chemical Properties

    Property Value Source
    Boiling Point Decomposes (NTP, 1992) CAMEO Chemicals
    Melting Point greater than 572 °F (decomposes) (NTP, 1992)
    Other sources (1)
    • 298-300 °C — Hazardous Substances Data Bank (HSDB)
    		CAMEO Chemicals
    Flash Point 300 °C
    As reported: 572 °F (300 °C) (Closed cup)
    		 Hazardous Substances Data Bank (HSDB)
    Vapor Pressure 3.69302e-07 kPa
    As reported: 0.00000277 [mmHg]
    Other sources (1)
    • 7.5X10-8 mm Hg at 25 °C — Hazardous Substances Data Bank (HSDB)
    		Haz-Map, Information on Hazardous Chemicals and Occupational Diseases
    Solubility less than 0.1 mg/mL at 68 °F (NTP, 1992)
    Other sources (7)
    • Solubility at 25 °C: water 0.6%, ethanol 0.1%, DMF 2.4% /Technical maleic hydrazide/ — Hazardous Substances Data Bank (HSDB)
    • Solubility in water at 25 °C, 300,000 mg/L at 20 °C and 340,000 mg/L at 25 °C /Maleic hydrazide potassium salt/ — Hazardous Substances Data Bank (HSDB)
    • Solubility in water at 25 °C, 200 g/kg /Maleic hydrazide sodium salt/ — Hazardous Substances Data Bank (HSDB)
    • Slightly sol in hot alcohol, more sol in hot water — Hazardous Substances Data Bank (HSDB)
    • SOL IN AQ ALKALI & CERTAIN ORG BASES — Hazardous Substances Data Bank (HSDB)
    • Sol @ 25 °C in acetone, 1000 ppm; water, 6000 ppm; dimethylformamide, 20400 ppm; dimethyl sulfoxide, 90000 ppm; xylene <1000 ppm — Hazardous Substances Data Bank (HSDB)
    • In water, 4,507 mg/L at 25 °C — Hazardous Substances Data Bank (HSDB)
    		CAMEO Chemicals
    Density 1.6 at 77 °F (USCG, 1999) - Denser than water; will sink
    Other sources (2)
    • 1.60 at 25 °C — Hazardous Substances Data Bank (HSDB)
    • 1.6 @25 °C — PAC Chemical Database, U.S. Department of Energy
    		CAMEO Chemicals
    Partition Coefficient (LogP) -0.63
    Other sources (1)
    • log Kow= -0.68 pH = 5; -1.96 at pH = 7; -2.41 at pH = 9 — Hazardous Substances Data Bank (HSDB)
    		SangsterLogP

    Source: PubChem

    Safer Alternatives

    Safer alternatives are referenced from current safer chemical databases and software logic, divided into the following three categories:

    1. The system compiles industrial uses of chemicals from the US EPA ChemView database and integrates them with the US EPA Safer Chemical Ingredients to create a safer alternatives list for each chemical. Chemicals may have multiple industrial uses, so the system uses an accordion-style display. Click the 'Suggested Safer Alternatives' tab to expand the table. If the use is broad (e.g., 'Commercial use'), the list may include more specific uses (e.g., 'Solvent'). If no information is available, refer to 'By Industrial Use (Full List)' for manual filtering.
    2. Categorized by industrial use (full list). This list contains safer chemicals for industrial uses, not necessarily replacements for the chemical on this page. You may filter by industrial use via the search bar at the top right of this tab, e.g., filter by 'Antioxidants'. Source: Safer Chemical Ingredients List
    3. Categorized by structural similarity, requiring:
      • Find chemicals with similar functional groups based on structural similarity (Tanimoto coefficient ≥ 0.8), likely having similar functions.
      • Chemicals identified as lower risk by risk assessment, such as level 3, level 4, or insufficient data.
      Practical substitution feasibility still requires domain knowledge and reference to physicochemical properties. For insufficient data (U), it means current hazard and risk assessment information is limited; thus, selection should be cautious and toxicology studies should be reviewed.
    4. Based on real-world case studies. Source: OECD SAAT

    Based on substructure, the system lists chemicals with risk levels 3 (usable but safer alternatives may be sought), 4 (safer chemicals), or insufficient data (U: not enough data to determine risk level). Information

    Due to GreenN data source limitations, there are currently no directly matched safer alternatives.
    Download: SCIL (CSV) SCIL (XLSX) ZeroPM PFAS (CSV) ZeroPM PFAS (XLSX) SUBSPORT+ case alternatives (CSV) SUBSPORT+ case alternatives (XLSX)
    Name CAS Industrial Use Safety Notes
    Loading
    This chemical is not listed in the ZeroPM PFAS alternative assessment database.
    OECD SAAT alternative case studies

    Full list of OECD SAAT case studies (not filtered by chemical).

    Case Study Name Link Publish Date Publishing Organization Related Products Description

    Contents

    1. Risk Level
    2. Chemical Substance Information
    3. Hazard Assessment Overview
    4. Hazard Assessment Summary Table
    5. Hazard Diagnostic Modules
    6. Safer Alternatives