Solvent naphtha (petroleum), light arom.; Low boiling point naphtha - unspecified; [A complex combination of hydro carbons obtained from distillation of aromatic streams. It consists predominantly of aromatic hydro carbons having carbon numbers predominantly in the range of C8 through C10 and boiling in the range of approximately 135 °C to 210 °C (275 °F to 410 °F).]

Risk Level Help

Chemical Substance Information

PubChem CID: 64742-95-6
CAS: 64742-95-6
EC NO: 265-199-0

Hazard Assessment Overview Help

Hazard Assessment Summary Table Help CSV format XLSX format

Filter by Region Industry Mandatory Regulation Reset

Assessment Type	Carcinogenicity	Mutagenicity	Reproductive Toxicity	Developmental Toxicity	Endocrine Disruption
Hazard Assessment Level	Insufficient data for classification	Insufficient data for classification	Insufficient data for classification	Insufficient data for classification	Insufficient data for classification

Assessment Type	Acute Toxicity	Systemic Toxicity - Single Dose	Systemic Toxicity - Repeated Dose	Neurotoxicity - Single Dose	Skin Sensitization	Respiratory Sensitization	Skin Irritation	Eye Irritation
Hazard Assessment Level	Insufficient data for classification	Insufficient data for classification	Insufficient data for classification	Insufficient data for classification	Insufficient data for classification	Insufficient data for classification	Insufficient data for classification	Insufficient data for classification

Assessment Type	Acute Aquatic Toxicity	Chronic Aquatic Toxicity
Hazard Assessment Level	Insufficient data for classification	Insufficient data for classification

Assessment Type	Persistence	Bioaccumulation
Hazard Assessment Level	Insufficient data for classification	Insufficient data for classification

Assessment Type	Reactivity	Flammability
Hazard Assessment Level	Insufficient data for classification	Insufficient data for classification

Hazard Diagnostic Modules

The Hazard Diagnostic Module consists of the following four computational chemistry methods. The predicted toxicity alerts are for reference only and should be evaluated together with other available data.

Substructure Alerts
Similarity Alerts
Read-Across
Classification Models

No SMILES structure is available for this chemical; substructure alert calculation cannot be performed.

Safer Alternatives

Safer alternatives are referenced from current safer chemical databases and software logic, divided into the following three categories:

The system compiles industrial uses of chemicals from the US EPA ChemView database and integrates them with the US EPA Safer Chemical Ingredients to create a safer alternatives list for each chemical. Chemicals may have multiple industrial uses, so the system uses an accordion-style display. Click the 'Suggested Safer Alternatives' tab to expand the table. If the use is broad (e.g., 'Commercial use'), the list may include more specific uses (e.g., 'Solvent'). If no information is available, refer to 'By Industrial Use (Full List)' for manual filtering.
Categorized by industrial use (full list). This list contains safer chemicals for industrial uses, not necessarily replacements for the chemical on this page. You may filter by industrial use via the search bar at the top right of this tab, e.g., filter by 'Antioxidants'. Source: Safer Chemical Ingredients List
Categorized by structural similarity, requiring:
- Find chemicals with similar functional groups based on structural similarity (Tanimoto coefficient ≥ 0.8), likely having similar functions.
- Chemicals identified as lower risk by risk assessment, such as level 3, level 4, or insufficient data.
Practical substitution feasibility still requires domain knowledge and reference to physicochemical properties. For insufficient data (U), it means current hazard and risk assessment information is limited; thus, selection should be cautious and toxicology studies should be reviewed.
Based on real-world case studies. Source: OECD SAAT

Based on substructure, the system lists chemicals with risk levels 3 (usable but safer alternatives may be sought), 4 (safer chemicals), or insufficient data (U: not enough data to determine risk level). Information

Due to SAS data source limitations, there are currently no directly matched safer alternatives.

Download: SCIL (CSV) SCIL (XLSX) ZeroPM PFAS (CSV) ZeroPM PFAS (XLSX) SUBSPORT+ case alternatives (CSV) SUBSPORT+ case alternatives (XLSX)

Name	CAS	Industrial Use	Safety	Notes

This chemical is not listed in the ZeroPM PFAS alternative assessment database.

SUBSPORT+ substitution case stories

Real-world substitution cases involving this chemical, from the SUBSPORT+ case story database (English records).

Case	Role of this chemical	Alternative	Sector	Function	Implementation	Reason for substitution
Substitution of a naphtha-based solvent in the cleaning of printing rolls	Substituted	1-Butoxypropan-2-ol (5131-66-8) Propan-2-ol (67-63-0)	Printing and reproduction of recorded media	Solvent	Full capacity — 2008 in Spain	CMR
Alternatives for polyurethane coating for drivable and slip resistant surfaces	Substituted	Diphenylmethanediisocyanate, isomers and homologues (9016-87-9)	Building and construction work	Plating agent	In use — 2010 in Germany, Austria and other European countries	CMR PBT neurotoxicant ecotoxicity
Alternatives for primer for use on concrete	Substituted	Aqueous primer	Building and construction work	Other	In use — 2010 in Germany and other European countries	CMR physical hazards
Surface treatment panels for walls and ceilings	Substituted	Distillates (petroleum), hydrotreated light paraffinic (64742-55-8) 2-Amino-2-methylpropanol (124-68-5)	Manufacture of wood and wood products Building and construction work	Plating agent	In use — 2011	CMR PBT skin/respiratory sensitizing ecotoxicity
Surface treatment of plywood	Substituted	Distillates (petroleum), hydrotreated light paraffinic (64742-55-8) 2-Amino-2-methylpropanol (124-68-5)	Manufacture of wood and wood products Building and construction work	Plating agent	In use — 2011	CMR skin/respiratory sensitizing PBT ecotoxicity
Surface treatment in wood working industry	Substituted	Distillates (petroleum), hydrotreated light paraffinic (64742-55-8) 2-Amino-2-methylpropanol (124-68-5)	Manufacture of wood and wood products	Plating agent	In use — 2011	CMR skin/respiratory sensitizing PBT ecotoxicity
Removal of paint from boat keels	Substituted	Rape oil (8002-13-9) 1-Ethylpyrrolidin-2-one (2687-91-4) Synthetic esters	Agriculture, forestry, fishery Other	Solvent	In use — 2011	physical hazards neurotoxicant CMR skin/respiratory sensitizing
Substitution of naphtha and hexamethylene diisocyanate in polyurethane-based paints	Substituted	Water (7732-18-5) Non-chemical alternative Electrostatic coatings	Manufacture of fabricated metal products, except machinery and equipment General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment Building and construction work Other	Solvent	Full capacity — 2009 in Spain	other toxic effects skin/respiratory sensitizing

OECD SAAT alternative case studies

Full list of OECD SAAT case studies (not filtered by chemical).

Case Study Name	Link	Publish Date	Publishing Organization	Related Products	Description

Searching, Assessment, and Screening system for safer alternative chemicals

Risk Level Help

Chemical Substance Information

Hazard Assessment Overview Help

Contents

Hazard Assessment Summary Table Help CSV format XLSX format

Filter by Region Industry Mandatory Regulation Reset

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Hazard Diagnostic Modules

Safer Alternatives

SUBSPORT+ substitution case stories

OECD SAAT alternative case studies

Contents

Chemical List

Compare Chemicals

Hazard Assessment

PRIO

Getting Started

Risk Level Help

Chemical Substance Information

Hazard Assessment Overview Help

Contents

Insufficient datafor classification

Insufficient datafor classification

Insufficient datafor classification

Insufficient datafor classification

Insufficient datafor classification

Insufficient datafor classification

Insufficient datafor classification

Insufficient datafor classification

Insufficient datafor classification

Insufficient datafor classification

Insufficient datafor classification

Insufficient datafor classification

Insufficient datafor classification

Insufficient datafor classification

Insufficient datafor classification

Insufficient datafor classification

Insufficient datafor classification

Insufficient datafor classification

Insufficient datafor classification

Hazard Diagnostic Modules

Safer Alternatives

SUBSPORT+ substitution case stories

OECD SAAT alternative case studies

Contents

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification

Insufficient data
for classification